超高速全自動端子壓著機(雙頭)

特點

本機是以高速度進行電線的尺寸切斷、兩端剝皮、兩端端子壓著的全自動機器。

· 控制箱安裝在本體顯眼的位置，充分展現了簡潔實用的外觀。

·在0.85秒的時間內能處理完成一條電線。表現出高效率的設計。（切斷長度350mm以下）

·各檢出裝置的標準裝備：電線有無、電線過緊、手把驅動、氣壓低下、張緊失效、端子有無、端子過緊、剝皮不良及壓著不良等，并能自動停止。

·在主操作面板可以設定切斷長度、條數、把數、并可以調整切刀深度、剝皮長度等功能，能大幅縮短調整時間，更具有定時啟動能提高生產效率。

This is a full automatic machine specially developed for cutting wire to constant lenght, stripping both ends crimping terminal on both ends of wire at high speed.

· By mounting the control box on the main body, compact appearance has been realized.

· High efficency design made capable of cutting one piece per 0.85 sec(cut lenght, 350mm or less).

· Various Detectors Equipped as Stangard: Detectors of electric wire overload, wire load, manual handle, airpresser low, crimp miss, draw tension, strip miss(auto-stop), reel stand applicable to side and feed terminal out of terminal(end,side), terminal load(both end and side type), terminal overload(both end and side type).

· The wire lenght, quantity, and number of lots can be set, and cut deep and strip lenght can be adjusted on the main control panel, thus considerably shortened the adjustment cycle time. Also, the time-start function may furher increase production efficiency.