<strike id="71n3t"><i id="71n3t"><cite id="71n3t"></cite></i></strike>
<strike id="71n3t"></strike>
<span id="71n3t"><dl id="71n3t"><del id="71n3t"></del></dl></span>
<span id="71n3t"><video id="71n3t"><ruby id="71n3t"></ruby></video></span>
<strike id="71n3t"><i id="71n3t"><del id="71n3t"></del></i></strike>
<strike id="71n3t"></strike>
<span id="71n3t"></span>
<span id="71n3t"><video id="71n3t"><ruby id="71n3t"></ruby></video></span>
<span id="71n3t"><dl id="71n3t"></dl></span>
<th id="71n3t"></th>
CLN-02-HBC
CLN-03
CLN-03-CH

CLN-01

CLT-MINI-CH

CLT-MINI

CLT-8W2

CLT-8SA

CL-950L

CL-520

CL-540+170

CL-560+160+260

CLT-C2S

CLT-C3-1.8S

CLT-2-1.2

CLT-C3-1.8/2.5

CLT-C1-2.5A

CLS-1T

CL-HC-80-A

CL-WK-01-A

CL-CCS-01

CL-TST-150

WRS-02

WRS-03

WRS-04

WRS-04&WRS-05

CL-180

CL-190

CLM-TWS

CL-PRA-01

各式橫、直式卡式模座

配合各式橫、直式卡式模座固定組
   

  產品展示 Product
CLT-MINI-CH

全自動端子壓著扭線沾錫機

特點

· 本機是專為生產細線而設計,采墊刀片方式調整剝皮長度,可達尺寸精細準確。
· 速度可分三段,300mm長以內,最快每分鐘55條,且會自動調整搭配之切斷、剝皮、壓著端子等相關動作。
· 端子壓著位置調整采電控按鍵調整,快速方便又精準。
· 端子壓著高度調整采用快速調旋鈕,每格精度0.02mm,免用工具用手即可調整,精準方便。
· 調整機臺及分解動作,采電控寸動方式,操作簡單又方便。
· 前端剝皮擺臂槍管部分,采用凸輪控制方式壓線,不因主軸速度改變造成誤動作,使裁切總長度更精準。
· 扭線采用三個夾爪旋轉方式,利用馬達帶動旋轉,可調整旋轉速度來改變扭線之緊度,使扭線又直又漂亮。
· 采用伺服馬達定寸送線,扭力大長度又精準。
· 沾錫角度接近90度點沾,使線徑沾錫度平均。
· 可以快速微調鈕旋轉方式調整點沾之深度,并可調整小錫杯升起之高度,使點沾深度更正確。
· 夾線位置與沾錫端點可調至約10mm,能控制線材沾錫端不易彎曲,點沾位置更精準。
· 沾錫時小錫杯會自動升起,并設計有自動撥除錫屑之功能,使沾錫處無錫屑之情形。
· 扭線機可快速更換為卡式模,改變為雙端端子壓著。
· 設計有錫爐溫度調整功能,內訂最低溫度250度以上才能運作生產。

  Full Automatic Terminal Crimping Soldering Machine

FEATURES

· Variable stripping lengths:Adjustable with padded cutting blades for optimal accuracy.
· The three phase speeds up to 55 wires per minute plug automated configuration and adjustment of time consumed in wire cutting, stripping,crimping, wire twisting and tin dipping.
· Electro-controlled adjustment of crimping positions in easy and handy as well as accurate key pressing.
· Fast manual tension adjustment with micro knob(in cells of 0.02mm) without any tool.
· Electrically controlled inching for easy adjustment of mold and step-by-step actions.
· The front stripping swing-arm(guide pipe) controls wire retaining with a cam, avoiding erroneous movements by changes in speed of the main shaft, keeping total cutting lengths.
· Wire twist is made possible by 3 rotary claws driven by motors.Adjustable ratation speeds help change tension of the twisted wires and keep them straight and neat.
· A servermotor is used to keep the large and accurate feeding torque and length.
· The quasi-90o tin dipping angle of the machine provides even tin dipping to the wire(in precise dipping depths).
· This machine comes with a micro knob for fast adjustment of tin dipping depth by lifting the tin cup up for precise dipping depths.
· With the wire holding position and the tin-dipping tip adjustable to 10mm, this machine keeps the in dipping end of the wire from curving, assuring precise dipping positions.
· When dipping tin, the tin cup in this machine raises automatically, An automatic wiper is provided ti remove tin chips from tin bath.

規格

  電源   Power supply   AC 220V 50/60 Hz 單相(1 phases)
  功能   Capacity   電源尺寸切斷、單端剝皮、雙端剝皮、單端壓著、雙端壓著、單端扭線、單端沾錫
  Cutting wire.stripping on one end ,stripping both ends,crimping on one end,crimping both ends twister on one end(optional equipments twister)
  速度   Speed   3300條/小時(pcs-hr)300m以內
  切斷長度   Cut length of wire   40mm~9.999 mm標準(Standard)
  剝皮長度   Stripping length   NO.1、NO.2側(Stripping side)1mm~10mm
  電線規格   Wire size   AWG#20~AWG#30(Standard)
  空氣壓力   Air pressure   5~6Kgs(需使用清潔干燥空氣)
  端子壓著能力   Crimping force   1.2Ton
  檢出裝置   Detectors equipped   電線有無、電線過載、電線接頭、剝皮不良、沖模不良、端子有無、端子過載、氣壓低下
  Wire overload,wire load,terminal overload,terminal load,strip miss crimp miss airpresser low.Wire joint
  本體尺寸   Dimensions   1.520 W * 929 L* 1900 H mm
  重量   Weight   約(Approx.)650kgs
 
WEBSITE WUXIJULUN 無錫鉅綸機械有限公司  
变态另类一区二区三区不卡_十八禁美女脱内衣无遮挡_午夜福利18禁_人妻碰_久久久婷婷综合五月激情中文字幕 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>